confined space Energy2D Forum › Forums › Energy2D Questions › confined space This topic contains 3 replies, has 2 voices, and was last updated by Charles Xie 3 months, 3 weeks ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts March 23, 2019 at 9:35 am #203 arasukParticipant What setting I need to set to model a confined space. For example I wish to simulate natural convection in a rectangular cavity. When I do it I also gives result outside the rectangular box, though I insulated. Any good idea? Thanks. I have included a file, please try it and also suggest any thing to work better. – Marsup Attachments:You must be logged in to view attached files. March 23, 2019 at 1:47 pm #205 Charles XieKeymaster You need to increase the thickness of the walls to avoid the leakage. This is because we use only a 100×100 grid, not enough to handle thin walls. I attached a revised model that has no leak. Attachments:You must be logged in to view attached files. March 24, 2019 at 5:09 am #211 arasukParticipant It is slightly better. But when I plot results I do not want any result outside the box. How to avoid. Is it considering radiation effect also even if I give emissivity as zero? Thanks again. Arasu March 24, 2019 at 1:31 pm #212 Charles XieKeymaster Show me your results. Perhaps I didn’t run long enough to see leakage. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.