How many papers have used it?

The following is a list of published scientific papers that have used Energy2D as a research tool (not just a citation):

  1. Norbert Schneider, Alexander Kolew, Marc Schneider, Matthias Worgull, Thurid Gspann, & Juerg Leuthold, High‐Resolution On‐Demand Nanostructures, Physica Status Solidi A, 217, 1900688, 2020
  2. Roshni Senthilkumar & Mohamed Al Musleh, Smart temperature-controlled infant car seat using thermoelectric devices, 2020 IEEE International IOT, Electronics and Mechatronics Conference (IEMTRONICS), 2020
  3. Jacob B. Setera, Brent D. Turrin, Gregory F. Herzog, Jill A. VanTongeren, Jeremy S. Delaney, & Carl C. Swisher III, 40Ar/39Ar thermochronology for sub‐milligram samples using a Ta‐platform micro‐furnace, with illustrations from the Bushveld Complex, Geochemistry, Geophysics, Geosystems, 2020
  4. Dario Valter Conca, Development of novel optical techniques for the study of cell-surface proteins in living cells at the single-molecule level, University College London, PhD dissertation, 2020
  5. Rui Li, Exploring the Use of Smartphone, Wireless Sensors, and 3D-Printing for Low-Cost Medical Technology: Diagnosis, Treatment, and Rehabilitation, University of Georgia, ProQuest Dissertations Publishing, 2020. 27833521
  6. LI Da-peng, YANG Dao-yu, & HUANG Dan, Energy2D在传热学虚拟仿真教学中的应用研究, 教育现代化, Vol. 49, 2020
  7. Inge Magdalena Sutjahja, Sufiyah Assegaf, & Surjamanto Wonorahardjo, Digital Simulation as Learning Aid for Heat Flow in Solid Theoretical Understanding, Journal of Physical Science and Engineering, 5(1), 11-21, 2020
  8. Fabio Longo, Alessio Cascardi, Paola Lassandro, & Maria Antonietta Aiello, A New Fabric Reinforced Geopolymer Mortar (FRGM) with Mechanical and Energy Benefits, Fibers, 8(8), 49, 2020
  9. Abhar Bhattarai, Bivek Baral, & Malesh Shah, Redesigning Direct Air Capture Using Renewable Energy, Bhutan Journal of Research and Development, pp.86-106, Spring, 2020
  10. Erik Mukk, Reinforcement learning based smart home heating solution in Energy2D simulation software, University of Tartu, 2020
  11. Vaithinathan Karthikeyan, James UtamaSurjadi, Joseph C.K.Wong, Venkataraman Kannan, Kwok-Ho Lam, Xianfeng Chen, Yang Lu, & Vellaisamy A.L.Roy, Wearable and flexible thin film thermoelectric module for multi-scale energy harvesting, Journal of Power Sources, 455, 2020
  12. Stefano Oss, Infrared imaging of a non-stationary thermal conductive process and observation of its Green’s kernel, European Journal of Physics, 41(1), 015102, 2020
  13. Massimiliano Malgieri & Pasquale Onorato, Teaching the heat transfer law using a stochastic toy model, European Journal of Physics, 41(1), 015103, 2020
  14. Surjamanto Wonorahardjo, Inge Magdalena Sutjahja, Y. Mardiyati, Heri Andoni, Dixon Thomas, Rizky Amalia Achsani, & S. Steven, Characterising thermal behaviour of buildings and its effect on urban heat island in tropical areas, International Journal of Energy and Environmental Engineering, 11, pp. 129–142, 2020
  15. Kishan Narotam, Design of a Thermally Controlled System for Medications, University of the Witwatersrand, 2019
  16. Margarita Castillo Tellez, Beatriz Castillo Tellez, Jose Andres Alanís Navarro, Juan Carlos Ovando Sierra, & Gerardo A. Mejia Perez, Kinetics of Drying Medicinal Plants by Hybridization of Solar Technologies, IntechOpen, DOI: 10.5772/intechopen.89686, 2019
  17. S. Sufiandi, T. Darmawan, & W. Dwianto, Mechanism of heat transfer using water in wood pores during wood densification, IOP Conference Series: Earth and Environmental Science, 374, 012013, 2019
  18. Bo Zhang, Tomas Mikysek, Veronika Cicmancova, Stanislav Slang, Roman Svoboda, Petr Kutalek, & Tomas Wagner, 2D GeSe2 amorphous monolayer, Pure and Applied Chemistry, 91(11), 2019
  19. Adem Yilmaz, Sinan Unvar, Ali Serkan Avci, & Bunyamin Aygun, Difference of Solar Chimney System Chimney Designs and Numerical Modeling in Collector Surface Areas, International Journal of Scientific & Engineering Research, Volume 10, Issue 9, pp 82-89, 2019
  20. Attila Zakarias, Tamas Laszlo, Csaba Krizbai, Tamas Szabo, & Norbert Demeter, Design and Development of Computer-Controlled Temperature Gradient System, Muszaki Tudomanyos Kozlemenyek, Volume 11, Issue 1, pp 187-190, 2019
  21. Graziella Gini, Thermal component conditioning: Creation of a temperature map using Energy2D, Department of Architecture, ETH Zurich, 2019
  22. Amardeep Singh, Simulation Of Coffee Stain Effects Using ANSYS Fluent, Journal of Physics: Conference Series, 1276, 012004, 2019
  23. Pasquale Onorato, Luigi M. Gratton, Stefano Oss, & Massimiliano Malgieri, From the dicey world to the physical laws: dice toy models for bridging microscopic and macroscopic understanding of physical phenomena, Journal of Physics: Conference Series, 1287, 012026, 2019
  24. Dorin Copaci, Dolores Blanco, & Luis E. Moreno, Flexible Shape-Memory Alloy-Based Actuator: Mechanical Design Optimization According to Application, Actuators, Volume 8, Issue 3, p. 63, 2019
  25. Sabri Pllana, Suejb Memeti, & Joanna Kolodziej, Customizing Pareto Simulated Annealing for Multi-objective Optimization of Control Cabinet Layout, The 22nd International Conference on Control Systems and Computer Science, 2019
  26. Surjamanto Wonorahardjo, Inge Sutjahja, Siti Aisyah Damiati, & Daniel Kurnia, Adjustment of Indoor Temperature using Internal Thermal Mass under Different Tropical Weather Conditions, Science and Technology for the Built Environment, 2019
  27. José Andrés Alanís Navarro, Margarita Castillo Téllez, Mario Arturo Rivera Martínez, Gabriel Pedroza Silvar, & Francisco Christian Martínez Tejeda, Computational thermal analysis of a double slope solar still using Energy2D, Desalination and Water Treatment, Volume 151, pp 26-33, 2019
  28. D. Copaci, F. Martin, L. Moreno, & D. Blanco, SMA-Based Elbow Exoskeleton for Rehabilitation Therapy and Patient Evaluation, IEEE Access, 2019
  29. R. C. G. M. Loonen, M. L. de Klijn-Chevalerias, & J. L. M. Hensen, Opportunities and Pitfalls of Using Building Performance Simulation in Explorative R&D Contexts, Journal of Building Performance Simulation, 2019
  30. Weera Punin, Somchai Maneewan, & Chantana Punlek, Heat Transfer Characteristics of a Thermoelectric Power Generator System for Low-Grade Waste Heat Recovery from the Sugar Industry, Heat and Mass Transfer, Volume 55, Issue 4, pp 979-991, 2019
  31. SC Corrêa, Desenvolvimento de uma sequência didática para o ensino de conceitos de calor segundo princípios da teoria da flexibilidade cognitiva, 2019
  32. Alexandre Dubor, Edouard Cabay, & Angelos Chronis, Energy Efficient Design for 3D Printed Earth Architecture, Humanizing Digital Reality, pp 383-393, 2018
  33. Savior Billianos, Thermal phenomena and flow streams in urban environment and simulation with Energy2D program, Hellenic Open University, 2018
  34. Ashenafi Tesfaye, Solomon Mariam, & Tewodros Walle, Design and Development of Low-Power Output Solar Chimney Power Plant, Addis Ababa Institute of Technology, 2018
  35. Alessandro Massaro, Angelo Galiano, Giacomo Meuli, & Saverio Francesco Massari, Overview and Application of Enabling Technologies Oriented on Energy Routing Monitoring, on Network Installation and on Predictive Maintenance, International Journal of Artificial Intelligence and Applications, Volume 9, No.2, pp 1-20, 2018
  36. Muammar Mansor, Khadouja Harouaka, Matthew S. Gonzales, Jennifer L. Macalady, & Matthew S. Fantle, Transport-Induced Spatial Patterns of Sulfur Isotopes (δ34S) as Biosignatures, Astrobiology, Volume 18, No. 1, pp 59-72, 2018
  37. Mahfoud Abderrezek & Mohamed Fathi, Effect of Dust Deposition on the Performance of Thin Film Solar Cell, Elektronika ir Elektrotechnika, Volume 24, pp 41-45, 2018
  38. FT Moro, IG Neide, & MJH Rehfeldt, TRANSFERÊNCIA DE ENERGIA TÉRMICA: UMA PROPOSTA INTEGRANDO ATIVIDADES EXPERIMENTAIS E SIMULAÇÕES COMPUTACIONAIS PARA O ENSINO MÉDIO, 2018
  39. Milan Marjanović, Snežana Dragićević, Ivan Milićević, Marko Popović, & Vojislav Vujičić, Application of Computer Simulation in Engineering Education, 7th International Scientific Conference Technics and Informatics in Education, 2018
  40. Rishi Gupta, Harsh Rathod, Balasubramanian Esakki, & Sean Blaney, NON-CONTACT NON-DESTRUCTIVE INFRARED THERMOGRAPHY BASED EVALUATION OF REINFORCED CONCRETE STRUCTURES, Leadership in Sustainable Infrastructure, 2017
  41. Amjad Nasser, Asmin Ashraf, & Dilna K. Salim, Comparative Study of Conventional and Green Residential Buildings, International Journal of Innovative Science and Research Technology, Volume 2, No. 4, 2017
  42. Stefan Heusler & Daniel Laumann, Himmlische Physik - Wolkenbilder als Ausgangspunkt fur die digitale Modellierung von Strukturbildungsprozessen, Unterricht Physik, 159/160, pp 69-73, 2017
  43. Faqih Rosyadi, Tomo Djudin, & Syaiful B Arsyid, REMEDIASI MISKONSEPSI PERPINDAHAN KALOR MENGGUNAKAN MODEL DIRECT INSTRUCTION BERBANTUAN ANIMASI ENERGY2D DI SMP, Jurnal Pendidikan dan Pembelajaran Khatulistiwa, Volume 6, No. 12, 2017
  44. Dorin Sabin Copaci, Non-Linear Actuators and Simulation Tools for Rehabilitation Devices, Ph.D. Dissertation, Carlos III University of Madrid, p. 89, 2017
  45. Proma Chakraborty, Impact of Furniture on the Energy Consumption of Commercial Buildings, Proceedings of the 2nd International Conference on Communication and Electronics Systems, pp 316-319, 2017
  46. E. Rozos, I. Tsoukalas, & C. Makropoulos, Turning Black into Green: Ecosystem Services from Treated Wastewater, Desalination and Water Treatment, Volume 91, October, pp 198-205, 2017
  47. Gu Hai-Rong, Dong Qiang-Zhu, Li Jin-Ping, Liang Feng-Dian, Zhang Fei, Wang Zuo-Jia, Heating Modes and Heat Transfer Process of Asphalt Pavement Hot In-place Recycling (沥青路面就地热再生加热方式与传热过程), Road Machinery & Construction Mechanization, Volume 34, Issue 11, pp 96-99, 2017
  48. Sadik A. Yildizel, Mechanical and Thermal Behaviors Comparison of Basalt and Glass Fibers Reinforced Concrete with Two Different Fiber Length Distributions, Challenge Journal of Structural Mechanics, Volume 3, Issue 4, pp 155-159, 2017
  49. Georgia Kaklamani, David Cheneler, Liam M. Grover, Michael J. Adams, Spiros H. Anastasiadis, & James Bowen, Anisotropic Dehydration of Hydrogel Surfaces, Progress in Biomaterials, Volume 6, Issue 4, pp157-164, 2017
  50. M. Stütz, F. Pixner, J. Wagner, N. Reheis, E. Raiser, H. Kestler, & N. Enzinger, Rotary Friction Welding of Molybdenum Components, The 19th Plansee Seminar, 2017
  51. Marie L. de Klijn-Chevalerias, Roel C.G.M. Loonen, A. Zarzycka, Dennis de Witte, M. V. Sarakinioti, & Jan L.M. Hensen, Assisting the Development of Innovative Responsive Facade Elements Using Building Performance Simulation, in M. Turrin, B. Peters, W. O'Brien, R. Stouffs, & T. Dogan (Eds.), Proceedings of the Symposium on Simulation for Architecture and Urban Design, pp. 243-250, 2017
  52. Mahfoud Abderrezek & Mohamed Fathi, Experimental Study of the Dust Effect on Photovoltaic Panels' Energy Yield, Solar Energy, Volume 142, pp 308-320, 2017
  53. Dennis de Witte, Marie L. de Klijn-Chevalerias, Roel C.G.M. Loonen, Jan L.M. Hensen, Ulrich Knaack, & Gregor Zimmermann, Convective Concrete: Additive Manufacturing to Facilitate Activation of Thermal Mass, Journal of Facade Design and Engineering, Volume 5, No. 1, 2017
  54. Javier G. Monroy & Javier Gonzalez-Jimenez, Gas Classification in Motion: An Experimental Analysis, Sensors and Actuators B: Chemical, Volume 240, pp 1205-1215, 2017
  55. P Bas Calopa, Projecte d'una incubadora amb regulació atmosfèrica, Universitat Politècnica de Catalunya, 2017
  56. Jose Manuel Martín Perez-Solorzano, High-Efficiency SMA-Based Actuator, Universidad Carlos III de Madrid, 2016
  57. Tom Rainforth, Tuan Anh Le, Jan-Willem van de Meent, Michael A. Osborne, & Frank Wood, Bayesian Optimization for Probabilistic Programs, 30th Conference on Neural Information Processing Systems, Barcelona, Spain, 2016
  58. W. Taylor Shoulders, Richard Locke, & Romain M. Gaume, Elastic Airtight Container for the Compaction of Air-Sensitive Materials, Review of Scientific Instruments, Volume 87, 063908, 2016
  59. Zachary R. Adam, Temperature Oscillations near Natural Nuclear Reactor Cores and the Potential for Prebiotic Oligomer Synthesis, Origins of Life and Evolution of Biospheres, Volume 46, Issue 2, pp 171-187, 2016
  60. Jiarui Chen, Shuyu Qin, Xinglong Wu, & Paul K Chu, Morphology and Pattern Control of Diphenylalanine Self-Assembly via Evaporative Dewetting, ACS Nano, Volume 10, No. 1, pp 832-838, 2016
  61. Teresa Moro, Italo Gabriel Neide, & Marcia Jussara Hepp Rehfeldt, Experimental activities and computer simulations: integration for the construction of thermal energy transfer concepts in high school, Brazilian Notebook of Physics Teaching, Volume 36, No. 3, 2016
  62. Truong Minh Thang, Research and simulate basic heat transfer processes using Energy2D software, The University of Transport Vietnam, 2016
  63. Atanas Vasilev, Geothermal Evolution of Gas Hydrate Deposits: Bulgarian Exclusive Economic Zone in the Black Sea, Comptes rendus de l‘Académie bulgare des Sciences, Volume 68, No. 9, pp 1135-1144, 2015
  64. Yit Man Heng, Experimental Investigation of Roof Top Solar Chimney for Natural Ventilation, Universiti Teknologi PETRONAS, 2015
  65. Mikolaj Michal Chojnacki, Modelling and Simulation of Transient Heat Transfer for Sustainable Buildings, Warsaw University of Technology, 2015
  66. Pedro A. Hernández, et al., Magma Emission Rates from Shallow Submarine Eruptions Using Airborne Thermal Imaging, Remote Sensing of Environment, Volume 154, pp 219-225, November 2014

Samples














Created by Charles Xie. © 2010- The Concord Consortium.